Details
NEW
Recommended
RECOMMENDED PRODUCT
Available on short notice!Our recommended products are ready for shipping within 2 – 11 working days.
X

ESCON2 Nano 24/2, 4-Q servo controller for DC/EC motors, 2 A, 5 - 24 V DC

Part number 809635

ESCON2 Nano 24/2, 4-Q servo controller for DC/EC motors, 2 A, 5 - 24 V DC
Price scales Quantity Price per unit
Prices excluding VAT and shipping costs 1-4 CHF 108.90
5-19 CHF 95.90
20-49 CHF 82.40
from 50 On request

Specifications

Product
Weight 2 g
Motor
DC motors up to 48 W
EC motors up to 48 W
Sensor
Without sensor (DC motors) Yes
Digital incremental encoder (2-channel, single-ended) Yes
Digital Hall sensors (EC motors) Yes
Operating modes
Current controller Yes (Torque)
Speed controller (closed loop) Yes
Electrical data
Operating voltage Vcc (min.) 5 V
Operating voltage Vcc (max.) 24 V
Max. output voltage (factor * Vcc) 0.9
Max. output current Imax 6 A
Max. time of peak output current Imax 6.5 s
Continuous output current Icont 2 A
PWM clock frequency of power stage 50 kHz
Sampling rate PI current controller 50 kHz
Sampling rate PI speed controller 10 kHz
Max. efficiency 93 %
Max. speed (DC) 120000 rpm
Max. speed (EC; 1 pole pair) sinusoidal commutation 120000 rpm
Inputs
Hall sensor signals H1, H2, H3
Encoder signals A, B
Max. encoder input frequency 6.2 MHz
Sensor signals Clock, Data
Digital inputs 8
Functionality of digital inputs direction, drive enable, general purpose, limit switch, PWM set value, PWM set value offset, quick stop, set value switch (4 fixed set values)
Analog inputs 2
Resolution, range, circuit 12-bit, 0…+5V, referenced to Ground
Functionality of analog inputs Analog set value, analog set value offset, general purpose
Outputs
Digital outputs 3
Functionality of digital outputs Error, lfault, limitation, hall sensor commutation frequency, hall sensor rotation frequencyimitation, Hall commutation frequency, Hall rotation frequency
Analog outputs 2
Resolution, range 12-bit, 0…+3.3V, referenced to Ground
Functionality of analog outputs current monitor, temperature monitor, velocity monitor, fixed value (general purpose)
Voltage outputs
Hall sensor supply voltage see "Sensor supply voltage"
Encoder supply voltage see "Sensor supply voltage"
Sensor supply voltage +5 VDC, max. 145 mA
Auxiliary output voltage +3.3 VDC, max. 20 mA
Interface
RS232 yes
USB (full speed) yes
CAN Yes
CANopen Slave
CANopen application layer CiA 301
CANopen frameworks CiA 305
CANopen profiles motion control CiA 402
Protective functions
Protective functions current limit, overcurrent, short-circuit of motor winding, excess temperature motor, excess temperature controller, overvoltage, undervoltage, voltage transients, velocity limit, loss of feedback signal, system monitor, error & warning behavior management
Ambient conditions
Temperature – Operation (min.) -30 °C
Temperature – Operation (max.) 45 °C
Temperature – Extended Range +45…70 °C (for derating refer to Hardware Reference)
Temperature – Storage (min.) -40 °C
Temperature – Storage (max.) 85 °C
Humidity (non-condensing) (min.) 5 %
Humidity (non-condensing) (max.) 90 %
Mechanical data
Weight 2 g
Dimension (length) 23 mm
Dimension (width) 16 mm
Dimension (height) 4.5 mm
Mounting Plugs into socket with 0.4 mm pitch, mounting holes for M2 screws
Software
Installation program Motion Installer
Graphical User Interface Motion Studio
Operating system Windows 11, 10
Functions
CANopen Profile Velocity Mode Yes
CANopen Cyclic Synchronuous Velocity Yes
CANopen Cyclic Synchronuous Torque Yes
Velocity mode Yes
Current mode Yes
Analog set value Yes
Velocity Control (Feed Forward) Yes
Quickstop Yes
Enable Yes
Advanced automatic control settings Yes

Description

The ESCON2 Nano 24/2 is a dynamic OEM 4-quadrant PWM servo controller module for integration into customer systems. Suitable for the efficient control of brushed DC motors and brushless EC motors (BLDC) with Hall sensors and/or encoders up to 48 watts/144 watts.

Downloads

Videos

Buy suitable accessories